HP StorageWorks Fabric OS 5.X Command Reference Guide (AA-RVHVB-TE, September 2005)

638 Fabric OS commands
Examples
To test the serial link of the following port path:
Diagnostic
When it detects failures, the test might report one or more of the following error messages:
DATA
ERRSTAT
INIT
STATS
TIMEOUT
See also
cmemRetentionTest
crossPortTest
itemList
portRegTest
spinSilk
-duration count Specifies the duration, in milliseconds, to perform this test on the
primitive. The default value is 100.
--ports itemlist Specifies a list of blade ports to test. By default all the blade ports in the
specified slot (--slot) is used. See itemList for further details.
switch:admin> sltest -ports 0/5-0/31 -speed 4 -lb_mode 1 passcnt 1
Running Port sltest ....
passed.