HP StorageWorks Fabric OS 5.X Command Reference Guide (AA-RVHVB-TE, September 2005)

Fabric OS 5.x command reference guide 505
Displays port throughput performance in bytes, kilobytes, or megabytes.
Synopsis
portperfshow [interval]
Availability
all users
Description
Use this command to display throughput information for all ports on the switch. Data appears in 8 or 16
columns, one column per port plus one column that displays the total for these ports. Results appear every
second or over the specified interval, until Enter, Ctrl-c, or Ctrl-d is pressed.
This command displays the number of bytes received plus the number of bytes transmitted per interval.
Throughput values are displayed as either bytes, kilobytes (k), megabytes (m), or gigabytes (g). Values
are always rounded down.
Operands
This command has the following operand:
Examples
To display port throughput for a switch:
See also
portStatsShow
portPerfShow
interval Specify the interval, in seconds, between each sample. The default is
one second. This operand is optional.
switch:user> portperfshow 20
0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 Total
============================================================================
slot 1: 0 0 23k 0 0 134k 0 12m 0 7.3m 0 312m 0 1.1g 0 0 1.4g
slot 2: 0 212m 0 0 784k 0 0 0 43m 0 85m 0 275k 0 498 0 341m
0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 Total
============================================================================
slot 1: 0 0 26k 0 0 160k 0 13m 0 7.5m 0 310m 0 1.2g 0 0 1.3g
slot 2: 0 178m 0 0 812k 0 0 0 43m 0 87m 0 272k 0 330 0 310m