HP StorageWorks Fabric OS 5.X Command Reference Guide (AA-RVHVB-TE, September 2005)

Table Of Contents
230 Fabric OS commands
Displays the contents of the specified FICON
database.
Synopsis
ficonshow RNID [fabric]
ficonshow LIRR [fabric]
ficonshow SwitchRNID [fabric]
ficonshow RLIR [fabric]
ficonshow ILIR [fabric]
Availability
all users
Description
Use this command to display the contents of a FICON
database. The ficonShow database operand is
the name of the database to display. If the fabric operand is absent, the command displays the
members of the named database that are local to the switch on which the command was issued. If the
fabric operand is present, it must be entered exactly as shown, and this specifies that all members are
displayed, both local and remote.
The following information might be displayed, depending on which database you enter and which
operands you use with the command:
ficonShow
Domain Displays the domain ID.
Fabric WWN Displays the fabric WWN.
Flag Indicates if the node is valid, not valid, or not current. Flag values are
as follows:
0x00 Indicates node ID of the storage port for RNID
switch for SwitchRNID is valid.
0x10 Indicates node ID of the channel port is valid.
0x20 Indicates the node ID of the storage port is not
current.
0x30 Indicates the node ID of the channel port is not
current.
0x40 Indicates the node ID of the storage port for
RNID switch for RLIR is not valid.
0x50 Indicates the node ID of the channel port is not
valid.
Fmt Displays the record-registration format.
FRU Failure Description Indicates the FRU failure type as one of the following:
WWN card [unit number]
Power Supply [unit number]
Hardware Slot [unit number]
Blower [unit number]
FRU Part Number Displays the FRU part number.