HP StorageWorks Fabric OS 5.X Command Reference Guide (AA-RVHVB-TE, September 2005)

Fabric OS 5.x command reference guide 169
Sets the error log start and end delimiter for messages sent to the console and syslog.
Synopsis
errdelimiterset [-s “start_delimiter_string“] [-e “end_delimiter_string“]
Availability
admin
Description
Use this command to set the error log start and end delimiter for log messages sent to the console and
syslog. An empty string clears the start and the end delimiters (including the colon) so that they are not
displayed.
If no arguments are supplied to the command, it instead displays the existing errDelimiterSet
configuration. These delimiters are stored persistently.
Operands
This command has the following optional operands:
Examples
To display the start and end delimiter:
To change the start and end delimiter (with sample output):
See also
errDump
errFilterSet
errShow
errDelimiterSet
-s start_delimiter_string Specifies the alphanumeric string for the start delimiter;
up to 10 characters are allowed.
-e end_delimiter_string Specifies the alphanumeric string for the end delimiter;
up to 10 characters are allowed.
switch:admin> errdelimiterset
delimiter start string: <none>
delimiter end string: <none>
switch:admin> errdelimiterset -s "Start" -e "End"
Start:2003/03/10-09:54:03, [NS-1002], 1035,, ERROR, SWITCH43, Name
Server received an invalid request from device 10:02:32:A3:78:23:23:End