Brocade Fabric OS Message Reference Guide (53-1000242-01, November 2006)

Fabric OS Message Reference 2-13

Publication Number: 53-1000242-01

AUTH-1038

Message

Probable

Cause

Indicates that the PKI certificate is not installed properly.

Recommended

Action

Reinstall the PKI certificate, using the pkiCreate command.

Reinitialize authentication using the portDisable and portEnable commands or the switchDisable and

switchEnable commands.

If the message persists, run supportFtp (as needed) to set up automatic FTP transfers; then run the

supportSave command and contact your switch service provider.

Severity ERROR

<timestamp>, [AUTH-1038], <sequence-number>,, ERROR, <system-name>,

Failed to retrieve certificate during <authentication phase>: port