Brocade Fabric OS Message Reference Guide (53-1000242-01, November 2006)

61-4 Fabric OS Message Reference
Publication Number: 53-1000242-01
SULB-1035
61
Recommended
Action
Run the firmwareShow command to verify the firmware versions. Also run the switchShow command
to make sure the switch is enabled.
Severity WAR NIN G
SULB-1035
Message
Probable
Cause
Indicates that an error has occurred during the firmwareDownload. The error can be caused by
inconsistent AP blade firmware. It can also be caused by persistent storage hardware failure, or other
hardware failures.
Recommended
Action
Try reseating the AP blade. Run firmwareDownload again. If the problem persists, contact your switch
service provider.
Severity ERROR
SULB-1036
Message
Probable
Cause
Indicates the firmware version running in the system. This is generally logged before download and
after download of the firmware to store version information.
Recommended
Action
No action is required.
Severity INFO
<timestamp>, [SULB-1035], <sequence-number>,, ERROR, <system-name>,
An error has occurred during firmwaredownload.
<timestamp>, [SULB-1036], <sequence-number>,, INFO, <system-name>,
<The Version being logged><Version String>