Brocade Fabric OS Message Reference Guide (53-1000242-01, November 2006)

25-34 Fabric OS Message Reference
Publication Number: 53-1000242-01
FW-1191
25
FW-1191
Message
Probable
Cause
Indicates that the percentage of outgoing traffic that the port experiences has changed from a value
outside of the acceptable range to a value within the acceptable range.
Recommended
Action
No action is required. Respond to this message as is appropriate to the particular policy of the end-user
installation.
Severity INFO
FW-1192
Message
Probable
Cause
Indicates that the number of state changes that the port experiences has changed. The state of the port
has changed for one of the following reasons: the port has gone offline, has come online, is testing, is
faulty, has become an E_Port, has become an F_Port, has segmented, or has become a trunk port.
Recommended
Action
No action is required. Respond to this message as is appropriate to the particular policy of the end-user
installation.
Severity INFO
FW-1193
Message
Probable
Cause
Indicates that the number of state changes that the port experiences has fallen below the low boundary.
The state of the port has changed for one of the following reasons: the port has gone offline, has come
online, is testing, is faulty, has become an E_Port, has become an F_Port, has segmented, or has become
a trunk port.
A low number of port state changes means that the switch is functioning normally.
<timestamp>, [FW-1191], <sequence-number>,, INFO, <system-name>,
<Port Name>, <Label>, is between high and low boundaries(High=<High
value>, Low=<Low value>). Current value is <Value> <Unit>.
<timestamp>, [FW-1192], <sequence-number>,, INFO, <system-name>,
<Port Name>, <Label>, value has changed(High=<High value>, Low=<Low
value>). Current value is <Value> <Unit>.
<timestamp>, [FW-1193], <sequence-number>,, INFO, <system-name>,
<Port Name>, <Label>, is below low boundary(High=<High value>,
Low=<Low value>). Current value is <Value> <Unit>.