Brocade Fabric OS Command Reference Manual (53-1000240-01, November 2006)

Fabric OS Command Reference Manual 2-717
Publication Number: 53-1000240-01
txdPath
2
Note: Enter commands in lowercase only; mixed case is for readability.
-nonstop mode Specify nonstop mode. If set to a nonzero value, the test does not stop on the first
error. The default value is 0.
-ports itemlist Specify a list of user ports to test. By default, all of the user ports in the current
switch are tested. This option can be used to restrict testing to the specified ports.
Examples To run the txdPath test:
Diagnostics When it detects failure(s), the test can report one or more of the following error messages:
DATA
ERRSTAT
INIT
PORTDIED
STATS
TIMEOUT
XMIT
Refer to the Fabric OS Message Reference for more information.
See Also backport, camTest, centralMemoryTest, cmemRetentionTest, cmiTest, crossPortTest, itemList,
portLoopbackTest, portRegTest, spinSilk, sramRetentionTest
switch:admin> txdpath
Running TX Data Path Test ....
Test Complete: "txdpath" Pass 10 of 10
Duration 0 hr, 0 min & 47 sec (0:0:47:645).