HP StorageWorks Fabric OS 5.X Diagnostics and System Error Messages Reference Guide (AA-RVHZB-TE, September 2005)

390 Error messages
TRCE-1004
Message
Probable Cause
Indicates that trace dump files have been created on the switch or the indicated slot but are not
automatically transferred from the switch because auto-FTP is disabled.
Recommended Action
Run supportFtp to set up and enable automatic FTP transfers.
Run traceFtp to set up and enable automatic FTP transfers.
Severity
WARNING
TRCE-1005
Message
Probable Cause
Indicates that the connectivity test to the FTP host failed. This is usually caused by problems such as a
wrong FTP address, FTP server being down, or the network being down.
Recommended Action
Verify that the FTP parameters specified in supportFtp are correct.
Verify that the FTP parameters specified in traceFtp are correct.
Verify that the switch is connected to your Ethernet network.
Verify that the your network is up and running.
Severity
ERROR
TRCE-1006
Message
Probable Cause
Indicates that a connectivity test to the FTP host has succeeded.
<timestamp>, [TRCE-1004], <sequence-number>,, WARNING,
<system-name>, Trace dump< optional slot indicating on which slot
the dump occurs > was not transferred because trace auto-FTP
disabled.
<timestamp>, [TRCE-1005], <sequence-number>,, ERROR, <system-name>,
FTP Connectivity Test failed due to error.
<timestamp>, [TRCE-1006], <sequence-number>,, INFO, <system-name>,
FTP Connectivity Test succeeded to FTP site ' <FTP target configured
by users.> '.