HP StorageWorks Fabric OS 5.X Diagnostics and System Error Messages Reference Guide (AA-RVHZB-TE, September 2005)

Fabric OS 5.x diagnostics and system error messages reference guide 247
FW-1377
Message
Probable Cause
Indicates that the number of illegal commands has fallen below the low boundary. This counter tracks how
many times commands allowed only on the primary FCS switch have been executed on a non-primary FCS
switch. There are many commands that can be executed only on the primary FCS switch as well as one
security command that can be executed only on a backup FCS switch. The counter increments every time
someone issues one of these commands on a switch where it is not allowed.
Recommended Action
No action is required.
Severity
INFO
FW-1378
Message
Probable Cause
Indicates that the number of illegal commands has risen above the high boundary. This counter tracks how
many times commands allowed only on the primary FCS switch have been executed on a non-primary FCS
switch. There are many commands that can be executed only on the primary FCS switch as well as one
security command that can be executed only on a backup FCS switch. The counter increments every time
someone issues one of these commands on a switch where it is not allowed.
Recommended Action
Responses to security-class messages depend on user policies. Consult your security administrator for
response strategies and policies.
Severity
WARNING
FW-1379
Message
Probable Cause
Indicates that the number of illegal commands has changed from a value outside of the acceptable range
to a value within the acceptable range. This counter tracks how many times commands allowed only on the
<timestamp>, [FW-1377], <sequence-number>,, INFO, <system-name>,
<Label>, is below low boundary(High=<High value>, Low=<Low value>).
Current value is <Value> <Unit>.
<timestamp>, [FW-1378], <sequence-number>,, WARNING, <system-name>,
<Label>, is above high boundary(High=<High value>, Low=<Low
value>). Current value is <Value> <Unit>.
<timestamp>, [FW-1379], <sequence-number>,, INFO, <system-name>,
<Label>, is between high and low boundaries(High=<High value>,
Low=<Low value>). Current value is <Value> <Unit>.