HP StorageWorks Fabric OS 5.X Diagnostics and System Error Messages Reference Guide (AA-RVHZB-TE, September 2005)

216 Error messages
FW-1297
Message
Probable Cause
Indicates that the number of telnet violations has fallen below the low boundary. Telnet violations indicate
that a telnet connection request has been received from an unauthorized IP address. The TELNET_POLICY
contains a list of TCP/IP addresses that are authorized to establish telnet connections to switches in the
fabric. The IP addresses use standard "dot" notation (for example, 255.255.255.255).
Recommended Action
No action is required.
Severity
INFO
FW-1298
Message
Probable Cause
Indicates that the number of telnet violations has risen above the high boundary. Telnet violations indicate
that a telnet connection request has been received from an unauthorized IP address. The TELNET_POLICY
contains a list of TCP/IP addresses that are authorized to establish telnet connections to switches in the
fabric. The IP addresses use standard "dot" notation (for example, 255.255.255.255).
Recommended Action
Run the errShow command to determine the IP address that sent the request. Responses to security-class
messages depend on user policies. Consult your security administrator for response strategies and policies.
Severity
WARNING
FW-1299
Message
Probable Cause
Indicates that the number of telnet violations has changed from a value outside of the acceptable range to
a value within the acceptable range. Telnet violations indicate that a telnet connection request has been
received from an unauthorized IP address. The TELNET_POLICY contains a list of TCP/IP addresses that are
<timestamp>, [FW-1297], <sequence-number>,, INFO, <system-name>,
<Label>, is below low boundary(High=<High value>, Low=<Low value>).
Current value is <Value> <Unit>.
<timestamp>, [FW-1298], <sequence-number>,, WARNING, <system-name>,
<Label>, is above high boundary(High=<High value>, Low=<Low
value>). Current value is <Value> <Unit>.
<timestamp>, [FW-1299], <sequence-number>,, INFO, <system-name>,
<Label>, is between high and low boundaries(High=<High value>,
Low=<Low value>). Current value is <Value> <Unit>.