HP StorageWorks Fabric OS 5.X Diagnostics and System Error Messages Reference Guide (AA-RVHZB-TE, September 2005)

Fabric OS 5.x diagnostics and system error messages reference guide 163
on core PID mode and the HP StorageWorks Fabric OS 5.x command reference guide for information on
the configure command and ficoncupset command.
Severity
WARNING
FICU-1005
Message
Probable Cause
Indicates that an initialization of a module within the FICON-CUP daemon failed.
Recommended Action
Download a new firmware version using the firmwareDownload command. Refer to the HP
StorageWorks Fabric OS 5.x command reference guide
for more information on this command.
Severity
ERROR
FICU-1006
Message
Probable Cause
Indicates that the path with the specified PID and channel image ID lost allegiance to a FICON-CUP
device.
Recommended Action
Check if the FICON channel corresponding to the PID in the message is functioning correctly.
Severity
WARNING
FICU-1007
Message
Probable Cause
Indicates that memory resources are low. This might be a transient problem.
Recommended Action
If the message persists, check the memory usage on the switch, using the memShow command.
<timestamp>, [FICU-1005], <sequence-number>,, ERROR, <system-name>,
Failed to initialize <module> rc = <error>
<timestamp>, [FICU-1006], <sequence-number>,, WARNING,
<system-name>, Control Device Allegiance Reset (Logical Path:
0x<PID>:0x<channel image ID>)
<timestamp>, [FICU-1007], <sequence-number>,, WARNING,
<system-name>, <function name>: Failed to allocate memory while
performing <message>