Brocade Web Tools Administrator's Guide - Supporting Fabric OS v5.3.0 (53-1000435-01, June 2007)

Web Tools Administrator’s Guide 159
Publication Number: 53-1000435-01
Configuring Fabric Watch thresholds
12
To open Fabric Watch window
1. Select a switch from the Fabric Tree and log in if necessary.
2. Click Fabric Watch in the Manage section of the Tasks menu.
The Fabric Watch window opens, as shown in Figure 72.
Configuring Fabric Watch thresholds
The Threshold Configuration tab enables you to configure event conditions. From this tab, you
configure threshold traits, alarms, and email configuration.
Use the procedures in this section to configure threshold traits for all classes except for the FRU
class. Use the procedure described in “Configuring alarms for FRUs” on page 162 for the FRU
class.
CONFIGURING THRESHOLD TRAITS
Configure threshold traits to define a threshold for a particular class and area. You can configure
the following traits for a threshold:
• Unit—The string used to define the units of measurement for the area
• Time Base—The time base (second, minute, hour, day) for the area
• Low Boundary—The low threshold for the event-setting comparisons
• High Boundary—The high threshold for the event-setting comparisons
• Buffer Size—The size of the buffer zone used in event-setting comparisons