Brocade Network Advisor Installation Guide v11.1x (53-1002320-01, May 2011)

24 of 47 Brocade Network Advisor Installation Guide
53-1002320-01
Professional edition configuration
6. Complete the following steps on the Server IP Configuration screen (Figure 2).
FIGURE 2 Server IP Configuration screen
The Server IP Configuration address is set to “localhost” by default. You cannot change this address.
a. Select an address from the Switch - Server IP Configuration Preferred Address list.
b. Click Next.
7. Complete the following steps on the Server Configuration screen (Figure 3).
NOTE
Do not use port 1527 for any of these port numbers. Port 1527 is used internally by the server.
FIGURE 3 Server Configuration screen
a. Enter a port number in the Web Server Port # field (default is 80).
b. Enter a port number in the Database Port # field (default is 5432).
c. Enter a port number in the Starting Port # field (default is 24600).
NOTE
The server requires 13 consecutive free ports beginning with the starting port number.