Brocade Fabric OS MIB Reference Supporting Fabric OS v7.0.0 (53-1002151-01, April 2011)

Fabric OS MIB Reference 37
53-1002151-01
Interfaces group
2
ifInErrors
1.3.6.1.2.1.2.2.1.14
Read only The number of inbound packets that contained errors, which thereby
prevented them from being deliverable to a higher-layer protocol.
ifInUnknownProtos
1.3.6.1.2.1.2.2.1.15
Read only The number of packets received by way of the interface that were discarded
because of an unknown or unsupported protocol.
NOTE: This object is not supported.
ifOutOctets
1.3.6.1.2.1.2.2.1.16
Read only The total number of octets transmitted out of the interface, including framing
characters. This value is the number of 4-byte words transmitted and
multiplied by four.
ifOutUcastPkts
1.3.6.1.2.1.2.2.1.17
Read only The total number of packets that were requested, by higher-level protocols, to
be transmitted to a subnetwork-unicast address, including those that were
discarded or not sent.
NOTE: This object is not supported.
ifOutNUcastPkts
1.3.6.1.2.1.2.2.1.18
Read only The total number of packets that were requested, by higher-level protocols, to
be transmitted to a nonunicast address (for example, a
subnetwork-broadcast or subnetwork-multicast), including those that were
discarded or not sent.
NOTE: This object is not supported.
ifOutDiscards
1.3.6.1.2.1.2.2.1.19
Read only The number of outbound packets that were chosen to be discarded (even
though no errors had been detected) to prevent their being transmitted. One
possible reason for discarding such a packet could be to free buffer space.
ifOutErrors
1.3.6.1.2.1.2.2.1.20
Read only The number of outbound packets that could not be transmitted because of
errors.
ifOutQLen
1.3.6.1.2.1.2.2.1.21
Read only The length of the output packet queue (in packets).
NOTE: This object is not supported.
ifSpecific
1.3.6.1.2.1.2.2.1.22
Read only A reference to MIB definitions specific to the particular media being used to
realize the interface.
If the interface is realized by an Ethernet, then the value of this object refers
to a document defining objects specific to Ethernet. If this information is not
present, its value must be set to the Object Identifier 0 0, which is a
syntactically valid object identifier, and any conferment implementation of
ASN.1 and BER must be able to generate and recognize this value.
• eth0 returns null OID
• lo returns null OID
• fc0 returns null OID
Object and OID Access Description