Brocade Fabric OS MIB Reference Supporting Fabric OS v7.0.0 (53-1002151-01, April 2011)

Fabric OS MIB Reference 153
53-1002151-01
Fibre Channel port group
6
swFCPortRxEncOutFrs
1.3.6.1.4.1.1588.2.1.1.1.6.2
.1.26
Read only Counts the number of encoding error or disparity error outside frames
received.
swFCPortRxBadOs
1.3.6.1.4.1.1588.2.1.1.1.6.2
.1.27
Read only Counts the number of invalid ordered sets received.
swFCPortC3Discards
1.3.6.1.4.1.1588.2.1.1.1.6.2
.1.28
Read only Counts the number of Class 3 frames that the port has discarded.
swFCPortMcastTimedOuts
1.3.6.1.4.1.1588.2.1.1.1.6.2
.1.29
Read only Counts the number of multicast frames that have been timed out.
swFCPortTxMcasts
1.3.6.1.4.1.1588.2.1.1.1.6.2
.1.30
Read only Counts the number of multicast frames that have been transmitted.
swFCPortLipIns
1.3.6.1.4.1.1588.2.1.1.1.6.2
.1.31
Read only Counts the number of loop initializations that have been initiated by
loop devices attached.
swFCPortLipOuts
1.3.6.1.4.1.1588.2.1.1.1.6.2
.1.32
Read only Counts the number of loop initializations that have been initiated by
the port.
swFCPortLipLastAlpa
1.3.6.1.4.1.1588.2.1.1.1.6.2
.1.33
Read only Indicates the physical address (AL_PA) of the loop device that initiated
the last loop initialization.
swFCPortWwn
1.3.6.1.4.1.1588.2.1.1.1.6.2
.1.34
Read only The WWN of the Fibre Channel port. The contents of an instance are in
IEEE extended format, as specified in FC-PH.
swFCPortSpeed
1.3.6.1.4.1.1588.2.1.1.1.6.2
.1.35
Read-write The desired baud rate for the port.
The baud rate can be 1 Gbps, 2 Gbps, autonegotiate, or 4 Gbps or 8
Gbps. 4 Gbps is only applicable to the Brocade 4100, 4900, 7500,
7600, and 48000. 8 Gbps is only applicable to the Brocade DCX
director.
swFCPortName
1.3.6.1.4.1.1588.2.1.1.1.6.2
.1.36
Read only Supported in Fabric OS v4.1.x and later. A string that indicates the
name of the addressed port.
NOTE: The names should be persistent across switch reboots. Port
names do not have to be unique within a switch or within a
fabric.
swFCPortSpecifier
1.3.6.1.4.1.1588.2.1.1.1.6.2
.1.37
Read only This string indicates the physical port number of the addressed port.
This string can be entered as argument on CLI commands such as
portShow or wherever a physical port number is expected. The format
of the string is: <slot/>port, 'slot' being present only for bladed
systems.
For directors, such as Brocade 48000:
swFCPortSpecifier.64 = 4/15
For non-bladed systems, such as Brocade 4100:
swFCPortSpecifier.31 = 30
For LISL, the value is -1/<port #>.
Object and OID Access Description