Brocade Fabric OS MIB Reference Supporting Fabric OS v7.0.0 (53-1002151-01, April 2011)

Fabric OS MIB Reference 115
53-1002151-01
Entity MIB conformance information
5
Entity MIB conformance information
This section lists the entityConformance MIBs. Figure 41 on page 103 shows the structure of the
entityConformance group.
object and OID Access Description
entityCompliance
1.3.6.1.2.1.47.3.1.1
Not
accessible
The compliance statement for SNMP entities that implement version 1
of the Entity MIB.
Mandatory groups:
• entityPhysicalGroup
• entityLogicalGroup
• entityMappingGroup
• entityGeneralGroup
• entityNotificationsGroup
NOTE: This object is deprecated.
entity2Compliance
1.3.6.1.2.1.47.3.1.2
Not
accessible
The compliance statement for SNMP entities that implement version 2
of the Entity MIB.
Mandatory groups:
• 1: entityPhysicalGroup
• 2: entityPhysical2Group
• 3: entityGeneralGroup
• 4: entityNotificationsGroup
Components:
• Type: Group
Group: entityLogical2Group
Description: Implementation of this group is not mandatory for
agents which model all MIB object instances within a single
naming scope.
• Type: Group
Group: entityMappingGroup
Description: Implementation of the entPhysicalContainsTable is
mandatory for all agents. Implementation of the
entLPMappingTable and entAliasMappingTables are not
mandatory for agents which model all MIB object instances within
a single naming scope. Note that the entAliasMappingTable may
be useful for all agents, however implementation of the
entityLogicalGroup or entityLogical2Group is required to support
this table.
• Type: Object
Object: entPhysicalSerialNum
Min access: not-accessible
Description: Read and write access is not required for agents
which cannot identify serial number information for physical
entities, or cannot provide non-volatile storage for NMS-assigned
serial numbers. Write access is not required for agents which can
identify serial number information for physical entities, but cannot
provide non-volatile storage for NMS-assigned serial.