HP StorageWorks Fabric OS 5.X MIB Reference Guide (AA-RVHXB-TE, September 2005)

Fabric OS 5.x MIB reference guide 77
fcFxPortBbCredit
OID 1.3.6.1.2.1.75.1.1.5.1.5
Description The total number of receive buffers available for holding Class 1 connect-request, and
Class 2 or 3 frames from the attached Nx_Port. It is for buffer-to-buffer flow control in the
direction from the attached Nx_Port (if applicable) to Fx_Port.
fcFxPortRxBufSize
OID 1.3.6.1.2.1.75.1.1.5.1.6
Description The largest Data_Field Size (in octets) for an FT_1 frame that can be received by the
Fx_Port.
fcFxPortRatov
OID 1.3.6.1.2.1.75.1.1.5.1.7
Description The Resource_Allocation_Timeout value configured for the Fx_Port. This is used as the
time-out value for determining when to reuse an Nx_Port resource such as a
Recovery_Qualifier. It represents the error detect time-out value (E_D_TOV) (see next
object) plus twice the maximum time that a frame might be delayed within the fabric and
still be delivered.
fcFxPortEdtov
OID 1.3.6.1.2.1.75.1.1.5.1.8
Description The E_D_TOV value configured for the Fx_Port. The Error_Detect_Timeout value is used as
the time-out value for detecting an error condition.
Fx_Port class service parameters
fcFxPortCosSupported
OID 1.3.6.1.2.1.75.1.1.5.1.9
Description A value indicating the set of Classes of Service supported by the Fx_Port.
fcFxPortIntermixSupported
OID 1.3.6.1.2.1.75.1.1.5.1.10
Description A flag indicating whether the Fx_Port supports an Intermixed Dedicated Connection
(IDC).
fcFxPortStackedConnMode
OID 1.3.6.1.2.1.75.1.1.5.1.11
Description A value indicating the mode of Stacked Connect supported by the Fx_Port.
fcFxPortClass2SeqDeliv
OID 1.3.6.1.2.1.75.1.1.5.1.12
Description A flag indicating whether Class 2 Sequential Delivery is supported by the Fx_Port.