HP StorageWorks Fabric OS 5.X Diagnostics and System Error Messages Reference Guide (AA-RVHZB-TE, September 2005)
402 Error messages
is, using one method or the other to define all objects in the zoning database. If the devices on the port are
defined by a mixture of port IDs and WWNs, the zone enforcement is session based. If the S_ID list of the
hardware-enforced zoning overflows (over the S_ID limit), the hardware zone enforcement changes to
session-based zoning.
Recommended Action
No action is required.
Severity
INFO
ZONE-1005
Message
Probable Cause
Indicates that a port is zoned with mixed devices (WWN and <domain, portarea>). During zoning
database cross checking, it is detected that either:
• A port zone member is also listed as a member of a Mixed zone,
• A WWN zone member is also specified as a member of a Mixed zone.
You should use hard zone enforcement whenever possible. Hard zones are more secure than
"session-based hard zones". Both types of zones will trap a PLOGI, but hard zones will filter out the I/O
frames which “session-based” hard zones do not.
Recommended Action
If hard zone enforcement is preferred, edit the zoning database to have the port zoned with devices
defined as either WWN or defined as <domain, portarea> but do not mix the methods used to define
these zone members.
Severity
INFO
ZONE-1006
Message
Probable Cause
Indicates that one or more devices are zoned as WWN devices and also zoned as <domain, portarea>
devices. The device(s) are used to specify zone members over separate zones.
Recommended Action
If hardware zoning enforcement is preferred, edit the zoning database to have the device zoned using only
one specification type, either WWN or <domain, portarea>.
Severity
WARNING
<timestamp>, [ZONE-1005], <sequence-number>,, INFO, <system-name>,
HARD & SOFT zones(<zone name>, <zone name>) definitions overlap.
<timestamp>, [ZONE-1006], <sequence-number>,, WARNING,
<system-name>, WARNING - WWN(<WWN number>) in HARD PORT zone
<zone_name>.