HP StorageWorks Fabric OS 5.X Diagnostics and System Error Messages Reference Guide (AA-RVHZB-TE, September 2005)

296 Error messages
Recommended Action
Run the firmwareDownload command to reinstall the firmware.
If the message persists, run supportFtp (as needed) to set up automatic FTP transfers; then run the
supportSave command and contact your switch service provider.
Severity
WARNING
PDM-1012
Message
Probable Cause
Indicates that the PDM process could not write data to the specified file name.
Recommended Action
Run the firmwareDownload command to reinstall the firmware.
If the message persists, run supportFtp (as needed) to set up automatic FTP transfers; then run the
supportSave command and contact your switch service provider.
Severity
WARNING
PDM-1013
Message
Probable Cause
Indicates that the switch configuration file /etc/fabos/fabos.[0|1].conf is empty.
Recommended Action
Run the firmwareDownload command to reinstall the firmware.
If the message persists, run supportFtp (as needed) to set up automatic FTP transfers; then run the
supportSave command and contact your switch service provider.
Severity
WARNING
PDM-1014
Message
<timestamp>, [PDM-1012], <sequence-number>,, WARNING,
<system-name>, File write failed: <file name>
<timestamp>, [PDM-1013], <sequence-number>,, WARNING,
<system-name>, File empty: <File Name>
<timestamp>, [PDM-1014], <sequence-number>,, WARNING,
<system-name>, Access sysmod failed