HP StorageWorks Fabric OS 5.X Diagnostics and System Error Messages Reference Guide (AA-RVHZB-TE, September 2005)

Fabric OS 5.x diagnostics and system error messages reference guide 199
FW-1172
Message
Probable Cause
Indicates that the number of protocol errors that the port experiences has changed. Occasional protocol
errors occur due to software glitches. Persistent protocol errors occur due to hardware problems.
Recommended Action
Check both ends of your cable connection. Verify that the cable and SFPs are not faulty.
Severity
INFO
FW-1173
Message
Probable Cause
Indicates that the number of protocol errors that the port experiences has fallen below the low boundary.
Occasional protocol errors occur due to software glitches. Persistent protocol errors occur due to hardware
problems.
Recommended Action
No action is required. Respond to this message as is appropriate to the particular policy of the end-user
installation. A low number of protocol errors means that the switch is functioning normally.
Severity
INFO
FW-1174
Message
Probable Cause
Indicates that the number of protocol errors that the port experiences has risen above the high boundary.
Occasional protocol errors occur due to software glitches. Persistent protocol errors occur due to hardware
problems.
Recommended Action
Check both ends of your connection. Verify that your cable and SFP are not faulty.
<timestamp>, [FW-1172], <sequence-number>,, INFO, <system-name>,
<Port Name>, <Label>, value has changed(High=<High value>, Low=<Low
value>). Current value is <Value> <Unit>.
<timestamp>, [FW-1173], <sequence-number>,, INFO, <system-name>,
<Port Name>, <Label>, is below low boundary(High=<High value>,
Low=<Low value>). Current value is <Value> <Unit>.
<timestamp>, [FW-1174], <sequence-number>,, WARNING, <system-name>,
<Port Name>, <Label>, is above high boundary(High=<High value>,
Low=<Low value>). Current value is <Value> <Unit>.