Fabric OS Administrator's Guide v7.0.0 (53-1002148-02, June 2011)
308 Fabric OS Administrator’s Guide
53-1002148-02
Changing bottleneck parameters
13
Example
The following example changes alerting parameters for the entire logical switch.
switch:admin> bottleneckmon --config -alert -lthresh .97 -cthresh .8 -time
5000
switch:admin> bottleneckmon --status
Bottleneck detection - Enabled
==============================
Switch-wide sub-second latency bottleneck criterion:
====================================================
Time threshold - 0.800
Severity threshold - 0.100
Switch-wide alerting parameters:
================================
Alerts - Yes
Latency threshold for alert - 0.970
Congestion threshold for alert - 0.800
Averaging time for alert - 5000 seconds
Quiet time for alert - 300 seconds
Per-port overrides for alert parameters:
========================================
Port Alerts? LatencyThresh CongestionThresh Time(s) QTime(s)
================================================================
1 N -- -- -- --
2 Y 0.990 0.900 4000 600
3 Y 0.990 0.900 4000 600
Excluded ports:
===============
Port
====
2
3
4
Example
The following example changes the sub-second latency criterion parameters for port 6.
switch:admin> bottleneckmon --config -lsubsectimethresh .6 -lsubsecsevthresh
40 6
switch:admin> bottleneckmon --status
Bottleneck detection - Enabled
==============================
Switch-wide sub-second latency bottleneck criterion:
====================================================
Time threshold - 0.800
Severity threshold - 50.000
Switch-wide alerting parameters:
================================
Alerts - Yes
Latency threshold for alert - 0.100
Congestion threshold for alert - 0.800
Averaging time for alert - 300 seconds
Quiet time for alert - 300 seconds