DCFM Enterprise User Manual (53-1001775-01, June 2010)

DCFM Enterprise User Manual 801
53-1001775-01
Switch port
D
MAC_ADDRESS MAC address of this port. varchar 64
PORT_MOD varchar 64
TYPE Port type. The specific mode currently enabled for the
port.
varchar 16
FULL_TYPE Port type. varchar 128
STATUS The current status of the switch port. varchar 64
HEALTH varchar 16
STATUS_MESSAGE Status message if any. varchar 255
PHYSICAL_PORT 1 = it is a physical port
0 = it is a virtual port
smallint
LOCKED_PORT_TYPE Locked port type. varchar 16
CATEGORY smallint
PROTOCOL varchar 16
SPEED Actual speed at which the port is currently operating. varchar 64
SPEEDS_SUPPORTED Supported speed values. varchar 32
MAX_PORT_SPEED The maximum speed the port is capable of
supporting, in bits per second.
int
DESIRED_CREDITS How many BB credits are desired for the port. int
BUFFER_ALLOCATED How many BB credits are allocated for the port. int
ESTIMATED_DISTANCE The estimated physical distance of the connection
between ports.
int
ACTUAL_DISTANCE The physical distance of the connection on the port in
relation to the other port.
int
LONG_DISTANCE_SETTING Whether long distance enabled. int
DEGRADED_PORT Whether a port is degraded or not. varchar 16
REMOTE_NODE_WWN Node WWN of the attached port. varchar 255
REMOTE_PORT_WWN WWN of the attached port. varchar 255
LICENSED 1 = the port is licensed; otherwise, 0. smallint
SWAPPED 1 = port is swapped; otherwise, 0. smallint
TRUNKED 1 = port is trunked; otherwise, 0. smallint
TRUNK_MASTER 1 = the port is trunk master; otherwise, 0. smallint
PERSISTENT_DISABLE 1 = port is persistently disabled. smallint
FICON_SUPPORTED 1 = FICON is supported; otherwise, 0. smallint
BLOCKED 1 = port is blocked; otherwise, 0. smallint
PROHIBIT_PORT_NUMBERS varchar 255
PROHIBIT_PORT_COUNT smallint
NPIV Whether NPIV mode is enabled. smallint
TABLE 206 SWITCH_PORT (Continued)
Field Definition Format Size