DCFM Enterprise User Manual (53-1001775-01, June 2010)
DCFM Enterprise User Manual 579
53-1001775-01
General tab
20
FIGURE 258 Encryption Group Properties dialog box
General tab
The properties displayed in the General tab are described below.
• Encryption group name - the name of the encryption group.
• Group status - the status of the encryption group, which can be OK-Converged or Degraded.
Degraded means the group leader cannot contact all of the configured group members.
• Deployment mode - the group’s deployment mode, which is transparent.
• Failback mode - The group’s failback mode, which can be automatic or manual. The failback
mode can be changed by clicking on the field and selecting the desired mode.
• Key vault - the vault type, either RSA Key Manager (RKM) NetApp Lifetime Key Manager (LKM),
HP Secure Key Manager (SKM), Thales Encryption Manager for Storage (TEMS), or Tivoli Key
Lifetime Manager (TKLM.
• REPL Support - whether or not remote replication LUNs support is enabled or disabled. You can
change the current setting by clicking on the field and selecting the desired state.
• Primary Key Vault IP address - The IP address of the primary key vault, either IPv4 or host
name.
• Primary Key Vault Connection Status - the status of the connection to the primary key vault. In
an operating environment, the status should be Connected.
• Backup key vault IP address - the IP address of the backup key vault.
• Backup Key Vault Connection Status - the status of the connection to the backup key vault, if a
backup is configured.
• Primary key vault certificate - the details of the primary vault certificate; for example, version
and signature information.
• Backup key vault certificate - the details of the backup vault certificate; for example, version
and signature information.