DCFM Enterprise User Manual (53-1001775-01, June 2010)

418 DCFM Enterprise User Manual

53-1001775-01

FCoE Licensing

The FCoE license enables Fibre Channel over Ethernet (FCoE) functionality on the Brocade 8000.

Without the FCoE license, the Brocade 8000 is a pure L2 Ethernet switch and will not allow FCoE

bridging capabilities.

With the FCoE license, the FCoE Configuration dialog displays virtual FCoE port information and

enables you to manage the virtual port information. The topology displays directly-connected

converged network adapters (CNAs) and the Properties dialog for the virtual FCoE port details.

Without the FCoE license, the virtual FCoE port displays in the device tree, but you cannot enable,

disable, or view virtual FCoE port information.

Save running to startup

The Save running to startup dialog box lists discovered CEE switches with Fabric OS version 6.3x

firmware or higher. You can select available switches and move them to the Selected Switches

table. Upon startup, the CEE switch configuration is copied to the selected switches.

NOTE

This dialog box launches if there is at least one CEE switch discovered. If no CEE switches exist, a

warning dialog displays.

Copying switch configurations to selected switches

1. To access the Save running to startup dialog box, select Configure > Switch > Save Running to

Startup from the menu bar.

The Save Running to Startup dialog box displays.

FIGURE 171 Save running to startup dialog box