Brocade Fabric Manager Administrator's Guide (53-10000196-01-HP, November 2006)

Fabric Manager Administrator’s Guide A-7
Publication Number: 53-1000196-01-HP
Device Port
A
Table A-6 shows how switch_port. port_status is mapped to API status and CIM operational status. This
mapping is not in sync with CIM values because CIM uses API status and Fabric Manager uses the Web
Tools Backend port status. These statuses have different values and logic.
Device Port
CIM uses an FCPort class and a ProtocolEndPoint class for device ports. Fabric Manager provides a
CIM_FCPort view for the FCPort class. This view also contains rows for switch ports. See “Switch
Port” on page A-4 for information on the CIM_FCPort view.
Fabric Manager does not have a view for the ProtocolEndPoint class.
Zone_config
The zone configuration is represented in CIM by ZoneSet. zone_config in the Fabric Manager database
determines the following record types:
• config
• zone
• alias
• quickloop
Use CIM_ZoneSet to access the Fabric Manager information.
Table A-6 Port Status Mapping
API port status WT port status (switch_port. port_status) Operational status (CIM)
Unknown Unknown,empty string, Mod_Inv, No_Module,
No_Light, In_Sync, No_Card, No_Port,
Laser_Flt, Port_Flt, Diag_Flt, Lock_Re
0
Not Supported 0
OK Online 2
Unused 1
Warning 4
Faulty No_Sync, 6
Disabled Disabled, Disabled (FMS mode) null
Table A-7 CIM_ZoneSet View
Column Type Qualifier Description Database
Equivalent
Example
Dbid Int Key Database key, used for
joins to replace traversal
of associations.
Zone_config.dbid 1
Fabric_id Int Key of fabric. Zone_config.fabric_id 2