Brocade Fabric Watch Administrator's Guide (53-1000243-01, November 2006)

Fabric Watch Administrator’s Guide 3-9

Publication Number: 53-1000243-01

Configuring Fabric Watch Thresholds

Figure 3-2 shows how to change the threshold boundary level to custom so that the new custom value of

80 is the new trigger point.

Figure 3-3 shows how to apply the custom value; unless you apply the value, it does not take effect.

Figure 3-2 Changing the Threshold Boundary Level

Figure 3-3 Applying Threshold Boundary Changes

1 : change behavior type 11 : change threshold alarm level

2 : change behavior interval 12 : change changed alarm

3 : change threshold boundary level 13 : change belowalarm

4 : change custom unit 14 : change abovealarm

5 : change custom timebase 15 : change inBetween alarm

6 : change custom low 16 : apply threshold alarm changes

7 : change custom high 17 : cancel threshold alarm changes

8 : change custom buffer 18 : return to previous page

9 : apply threshold boundary changes

10 : cancel threshold boundary changes

Select choice => : (1..18) [18]3

1 : Default

2 : custom

Enter boundary level type => : (1..2) [1] 2

Index ThresholdName BehaviorType BehaviorInt

216 eportRXPerf216 Triggered 1

217 eportRXPerf217 Triggered 1

218 eportRXPerf218 Triggered 1

219 eportRXPerf219 Triggered 1

220 eportRXPerf220 Triggered 1

221 eportRXPerf221 Triggered 1

222 eportRXPerf222 Triggered 1

223 eportRXPerf223 Triggered 1

Threshold boundary level is set at : Custom.