Brocade Fabric OS MIB Reference (53-1000241-01, November 2006)
Fabric OS MIB Reference 5-13
Publication Number: 53-1000241-01
swFault 1.3.6.1.4.1.1588.2.1.1.1.0.1
5
See Table 5-2 for the six traps defined in the SW.MIB, when it occurs, and how to configure the trap, if
possible.
See the Fabric OS Command Reference and the snmpMibCapSet command on how to enable or
disable the sending of traps from the various MIBs.
The swSsn variable is optional in trap messages.
The swGroupName, swGroupType, and swGroupMemPos variables are optional trap messages in
v2.6.x. The swGroupName, swGroupType, and swGroupMemPos variables are not supported in Fabric
OS v4.x and above.
Because FOS releases prior to v5.2.0 used to show the Enterprise Field in the swTraps from the
sysObjectID (set using config varaible "snmp.sysObjectID"), the Enterprise field will not always be
resolved to "sw". If the sysObjectID is changed by user the Enterprise field in the trap will show some
unresolved value.
To resolve this issue, beginning with the v5.2.0 release the SNMP configuration variable
snmp.trapEnterpriseFlag lets you define the way that the Enterprise field appears.
Select either the previous behavior in which the Enterprise field is taken from sysObjectID or the new
behavior in which the value in the Enterprise field will alway be "sw".
• Set the value of this variable to 0, to use the sysObjectID .
• Set the value to 1 to use the fixed enterprise value, "sw" (1.3.6.1.4.1.1588.2.1.1.1.) .
swFault 1.3.6.1.4.1.1588.2.1.1.1.0.1
This trap is no longer generated.
Table 5-2 SW MIB Traps
Name Specific When Configure
“swFault
1.3.6.1.4.1.1588.2.1.1.1.0.1”
on page 5-13
(not supported)
1 During boot, if diagnostics fail N.A.
“swSensorScn
1.3.6.1.4.1.1588.2.1.1.1.0.2”
on page 5-14
2Obsolete N.A.
“swFCPortScn
1.3.6.1.4.1.1588.2.1.1.1.0.3”
on page 5-14
3 Port changes state Always on
“swEventTrap
1.3.6.1.4.1.1588.2.1.1.1.0.4”
on page 5-15
4 Switch event See the Fabric OS Command Reference
and the snmpConfig command for
more information.
“swFabricWatchTrap
1.3.6.1.4.1.1588.2.1.1.1.0.5”
on page 5-16
5 Threshold reached Fabric OS Command: fwConfigure
“swTrackChangesTrap
1.3.6.1.4.1.1588.2.1.1.1.0.6”
on page 5-17
6 Login/logout Fabric OS Command:
trackChangesSet and
trackChangesShow