NAS b3000 v2 - Quick Start Guide (326190-002)

Configuration Setup
44 NAS b3000 v2 Quick Start Guide
Figure 10: Rapid Startup configuration review screen
Direct Access Method (Using Hostname)
The NAS b3000 v2 ships by default with DHCP enabled on the network port. If
the system is placed on a DHCP serviced network, with an active DNS server, and
the serial number of the device is known, it can be accessed through a client
running Microsoft Internet Explorer 5.5 (or later) on that network, using port 3201
of the device. The serial number may be found behind the front bezel of the
NAS b3000 v2, as illustrated in Figure 11.