NAS b3000 v2 - Quick Start Guide (326190-002)

33NAS b3000 v2 Quick Start Guide
2
Before You Begin
This chapter describes the preinitialization and configuration tasks required for
the HP StorageWorks NAS b3000 v2.
Preinitialization
Before beginning the installation process, verify that the hardware installation is
complete. Verify that the NAS b3000 v2 is completely installed in the rack and
that all cables and cords are connected except for the fiber cables attached to the
SAN switches. The setup utility documented here and in the next section only
provide basic setup for the network components of the NAS b3000 v2.
Note: If you need assistance with rack installation or hardware connections, refer to
the quick reference and rack installation guide included in the shipping carton.