NAS b3000 v2 - Quick Start Guide (326190-002)

Configuration Setup

45NAS b3000 v2 Quick Start Guide

Figure 11: Serial number location

Requirements

The following items are required to run the WebUI configuration application:

■ Windows-based PC loaded with Internet Explorer 5.5 (or later) on the same

segment as the NAS b3000 v2

■ DHCP-serviced network

■ DNS serviced network

■ Serial number of the NAS b3000 v2

Note: The NAS b3000 v2 is designed to be deployed without a monitor, keyboard,

and mouse. These ports are available and supported by the NAS device, if used.

Procedure

To initialize the NAS b3000 v2 using the WebUI configuration application:

1. Connect the Ethernet cables to the respective network ports of the

NAS b3000 v2 and the corresponding network segments in accordance with

the information in the “Configuration Information” section in Chapter 2.

2. See Figure 6 and Table 3 for the locations of the network ports on the

NAS b3000 v2.

D4059ABC3433

nas b2000