HP StorageWorks MSL4048 Tape Library getting started guide (AH560-96001, March 2007)

7 1 3 7
2 456 6 7
Front panel overview
1Power button
2 Magazine and mailslot
location
3 LEDs
4 LCD screen
5 Control keys
6 Air vents
7 Magazine
1
2 82 5 643 9 9 7
82 5 63 72
1
49 9
Back panel overview: parallel SCSI
1 68-pin HD parallel SCSI
connectors
2Fan
3 Power connector
4 Tape drive
5 Ethernet port
6 Serial port (HP Factory
use only)
7USBport
8 Pull-out tab containing
product information
9 Magazine release hole
One full-height Ultrium parallel SCSI tape drive
82 9 9 5 63 72
1
4
Two half-height Ultrium parallel SCSI tape drives
NOTE: The Back panel overviews show sample
configurations. Your Library may differ from
these illustrations.
Optional tabletop conversion cover
The MSL4048 Tape Library can either be installed into
a rack with the enclosed rails or installed into the
optional tabletop conversion cover and set on a flat
surface.
CAUTION! Operating the Tape Library on a flat
surface without the tabletop conversion poster
may cause errors or damage to the Library.
1SAS port
2Fan
3 Power connector
4 Tape drive
5 Ethernet port
6 Serial port (HP Factory
use only)
7USBport
8 Pull-out tab containing
product information
9 Magazine release hole
2 5 63
8 7
49 921
Back panel overview: SAS
One half-height Ultrium SAS tape drive
1 Fibre Channel Ports A
and B
2Fan
3 Power connector
4 Tape drive
5 Ethernet port
6 Serial port (HP Factory
use only)
7USBport
8 Pull-out tab containing
product information
9 Magazine release hole
Back panel overview:
Fibre Channel
One full-height Ultrium 960 Fibre Channel tape drive