HP StorageWorks 1510i Modular Smart Array Command Line Interface user guide (383074-002, July 2008)

4. [Optional] If required, enable access to the CLI via Telnet (not recommended) using the set service

command:

CLI> set service telnet on

CAUTION:

TheTelnetprotocolisnotasecuremethodoftransmittingdataoveranetwork.Because

Telnet does not encrypt data, anyone with the proper knowledge and tools can read

information being sent over the network. For this reason, HP recommends that you use SSH

to connect to the MSA1510i over a network, or use a serial connection to connect to the

MSA1510i directly.

Initial conﬁguration sequence