HP StorageWorks 1500 Modular Smart Array maintenance and service guide (356606-002, October 2006)

Removing or ins
talling a Fibre Channel interconnect blank
Before you begin
CAUTION:
• Before removing a component or blanking panel from an operational device, make sure that you
have the replacement part available. Removing a component or blank impacts the airflow and
cooling ability of the device. To avoid possible overheating, insert the new or replacement component
within one or two minutes. If the internal temperature exceeds acceptable limits, the device may
overheat and automatically shut down or restart.
• Parts can be damaged by electrostatic discharge. Use proper anti-static protection.
Removing an interconnect blank
• Lift the port-colored module latch (1) and pull the module out of the chassis (2).
15596
1
2
Installing an interconnect blank
Slide the blank into the MSA chassis bay until the blank clicks into place.
maintenance and service guide
73