HP StorageWorks Modular Smart Array 1000 Configuration Procedures for HP-UX Addendum (365448-001, April 2004)

Fibre Channel Arbitrated Loop and direct connect deployments
11Modular Smart Array 1000 Configuration Procedures - for HP-UX Addendum
7. In the directory window, navigate to the HP-UX directory on the CD and
select the firmware file to use. (Example: v430b285.bin)
8. Follow the onscreen instructions to complete the flashing process.
Wait for the Flash Successful message to be displayed on the front of
the MSA1000 controller.
9. When the Flash Successful message is displayed, close the message
window to return to the MSA Flash Utility main menu.
10. Select the controller that was flashed and click Reset to restart the controller.
Wait 2 -5 minutes for the controller to reset and the Startup Complete
message to be displayed on the front of the MSA1000 controller.
11. After the MSA1000 startup process is complete, in the MSA Flash Utility,
click Find and read the display to verify that the update was completed
successfully.
Figure 2: Confirming that the update was completed
12. If the MSA1000 is temporarily connected to a ProLiant server, either remove
the connection or, if desired, maintain the connection and configure the
MSA1000 controller and storage through the ACU on the ProLiant server.
See the Windows or Linux chapter of the MSA1000 installation guide for
instructions.