HP StorageWorks Modular Smart Array 1000 (MSA1000) Command Line Interface Reference Guide (September 2003)

13MSA1000 Command Line Interface Reference Guide

Command Line Interface (CLI)

The Command Line Interface (CLI) is used to configure and manage the

MSA1000. In addition, the CLI can be used to display system setup information

and status. It may also provide information on devices that are attached to the

controller.

Note: The CLI is available for all supported operating systems.

The CLI is accessed through a host server connected to the serial port of the

MSA1000.

Some CLI configuration and management tasks include configuring storage units

(LUNs), setting the addressing mode, limiting access to storage, and viewing

information on MSA1000 components (controller, unit, and cache).

This chapter discusses:

■ CLI Overview, page 14

■ CLI Setup, page 19

■ Help Commands, page 22

■ Display Commands, page 26

■ Array Controller Configuration Commands, page 33

■ LUN Management Commands, page 36

■ Server Connection Commands, page 51

■ Selective Storage Presentation/Access Control List Commands, page 55