active controllers in Windows environments (400678-002, October 2006)

Migrating to active/active controllers in Windows environments 29

(For systems with HP Basic MPIO software only)

Uninstall HP Basic MPIO software:

• From the server console desktop, select Start>Run.

• In the Run window, enter appwiz.cpl and then click OK to open the Add (or /)

Remove Programs Utility.

• Select the HP Basic MPIO program, and then click Change/Remove to uninstall the

software.

• Click OK. The server restarts.

• Close the Add (or/) Remove Programs Utility window.

• Verify that the system restarts without any issues.

(For systems with HP Secure Path MPIO software only)

Disable HP Secure Path services and drivers:

• From the server console desktop, select Start>Run.

• In the Run window, enter services.msc and then click OK to open the Services

Utility.

• In the right pane, double-click Compaq HS_ Service.

• Change the Startup type from Automatic to Disabled.

• Click Stop to stop the service.

• Click OK to close the window.

• In the right pane, double-click Secure Path Agent.

• Change the Startup type from Automatic to Disabled.

• Click Stop to stop the service.

• Click OK to close the window.

• If HP Secure Path Manager software is installed, double-click Element Manager for

Secure Path in the right pane to open the Element Manager for Secure Path

Properties window.

• Change the Startup type from Automatic to Disabled.

• Click Stop to stop the service.

• Click OK to close the window.

• Close the Services Utility.

• From the server console desktop, select Start>Run.

• In the Run window, enter devmgmt.msc and then click OK to open the Device

Manager Utility.

• Select SCSI and RAID controllers, right-click the Compaq Secure Path Disk Bus

device, and then select Disable.

• Click Yes when the pop-up warning is displayed.

• Close the Device Manager Utility.

• Click No if a pop-up window opens asking to restart the server.

Step Description (continued) Check