HP StorageWorks 2/8q Fibre Channel Switch Simple Network Management Protocol V.1 Reference Guide (November 2004)

Fabric Element MIB Objects
150 HP StorageWorks 2/8q Fibre Channel Switch Simple Network Management Protocol Reference Guide
fcFxPortAdminMode (1.3.6.1.2.1.75.1.2.1.1.4)
The desired operational mode of the FxPort.
■ Syntax—INTEGER { fPort(2), flPort(3) }
■ Access—Read-write
■ Status—Current
■ Return value—Unsupported; always returns error status 'NoSuchName'
FxPort physical level table
The objects described in this section are in table format indexed by switch index and port
index. An example of how to access one of these objects is: "snmpget localhost public
fcFxPortPhysAdminStatus.1.1".
This table contains one entry for each FxPort in the Fabric Element, and the physical level
status and parameters of the FxPorts.
fcFxPortPhysAdminStatus (1.3.6.1.2.1.75.1.2.2.1.1)
The desired state of the FxPort. A management station can place the FxPort in a desired state
by setting this object accordingly. The testing(3) state indicates that no operational frames can
be passed. When a Fabric Element initializes, all FxPorts start with fcFxPortPhysAdminStatus
in the offline(2) state. As the result of either explicit management action or per configuration
information accessible by the Fabric Element, fcFxPortPhysAdminStatus is changed to either
the online(1) or testing(3) states, or remains in the offline state.
■ Syntax—INTEGER { online(1) - place port online; offline(2) - take port offline;
testing(3) - initiate test procedures }
■ Access—Read-write
■ Status—Current
■ Return value—Refer to Table 34 for fcFxPortPhysAdminStatus read values. Refer to
Table 35 for fcFxPortPhysAdminStatus write values.
Table 33: Port operational modes
Mode Return value
Unknown 1
F_Port 2
FL_Port 3