HP StorageWorks HSG60 and HSG80 Array Controller and Array Controller Software Troubleshooting Guide (EK-G80TS-SA. C01, March 2005)

Utilities and Exercisers
69HSG60 and HSG80 Array Controller and Array Controller Software Troubleshooting Guide
3. Show one or more of the entries with the following command:
SHOW event_type entry# FULL
where:
■ event-type is LAST_FAILURE or MEMORY_SYSTEM_FAILURE.
■ entry# is ALL, MOST_RECENT, or 1 through 16.
■ FULL displays additional information, such as the Intel® i960 stack and
hardware component register sets (for example, the memory controller,
FX, host port, device ports, and so forth).
4. Exit FMU with the following command:
EXIT
The following example shows a last failure entry. The Informational Report—the
lower half of the entry—contains the Last Failure Code, reporting component, and
so forth, that can be translated with FMU to learn more about the event.
Figure 7: Sample last failure entry
Last Failure Entry: 4. Flags: 006FF300
Template: 1.(01) Description: Last Failure Event
Occurred on 28-OCT-2004 at 15:29:28
Power On Time: 0. Years, 14. Days, 19. Hours, 51. Minutes, 31.
Seconds
Controller Model: HSG80
Serial Number: AA12345678 Hardware Version: 0000(00)
Software Version: V088P(FF)
Informational Report
Instance Code: 0102030A Description:
An unrecoverable software inconsistency was detected or an
intentional restart or shutdown of controller operation was
requested.
Reporting Component: 1.(01) Description:
Executive Services
Reporting component's event number: 2.(02)
Event Threshold: 10.(0A) Classification:
SOFT. An unexpected condition detected by a controller
software component (e.g., protocol violations, host buffer
access errors, internal inconsistencies, uninterpreted
device errors, etc.) or an intentional restart or shutdown of
controller operation is indicated.
Last Failure Code: 20090010 (No Last Failure Parameters)
Last Failure Code: 20090010 Description:
This controller requested this controller to shutdown.
Reporting Component: 32.(20) Description:
Command Line interface
Reporting component's event number: 9.(09)
Restart Type: 1.(01) Description: No restart