HP StorageWorks HSG60 and HSG80 Array Controller and Array Controller Software Troubleshooting Guide (EK-G80TS-SA. C01, March 2005)

Last Failure Codes
240 HSG60 and HSG80 Array Controller and Array Controller Software Troubleshooting Guide
033E0108 An attempt was made to restart a device port at the Save Data Pointer
(SDP) Data Buffer Descriptor (DBD):
Last failure parameter [0] contains the PCB PORT_PTR value.
Last failure parameter [1] contains the PCB copy of the device port TEMP
register.
Last failure parameter [2] contains the PCB copy of the device port DBC
register.
Last failure parameter [3] contains the PCB copy of the device port
DNAD register.
Last failure parameter [4] contains the PCB copy of the device port DSP
register.
Last failure parameter [5] contains the PCB copy of the device port DSPS
register.
Last failure parameter [6] contains the PCB copies of the device port
SSTAT2/SSTAT1/SSTAT0/DSTAT registers.
Last failure parameter [7] contains the PCB copies of the device port
LCRC/RESERVED/ISTAT/DFIFO registers.
01
Table 56: Last Failure Codes and Repair Action Codes (Sheet 27 of 55)
Last
Failure
Code
Description
Repair
Action
Code