HP StorageWorks HSG60 and HSG80 Array Controller and Array Controller Software Troubleshooting Guide (EK-G80TS-SA. C01, March 2005)
Last Failure Codes
233HSG60 and HSG80 Array Controller and Array Controller Software Troubleshooting Guide
02FB2084 A processor interrupt was generated by the controller FX engine,
indicating an unrecoverable error condition:
Last failure parameter [0] contains the FX CSR.
Last failure parameter [1] contains the FX DILP.
Last failure parameter [2] contains the FX DADDR.
Last failure parameter [3] contains the FX DCMD.
20
02FB2086 A processor interrupt was generated by the controller’s XOR engine (FX),
indicating an unrecoverable error condition:
Last failure parameter[0] contains the FX CSR.
Last failure parameter[1] contains the FX DMA DILP.
Last failure parameter[2] contains the FX DMA DADDR.
Last failure parameter[3] contains the FX DMA DCMD.
Last failure parameter[4] contains the FX DMA DIR.
Last failure parameter[5] contains the FX active flag.
20
02FC0180 The FX detected a compare error for data that was identical. Previously
this error has always occurred due to a hardware problem.
01
02FD0100 The controller has insufficient free memory to restore saved configuration
information from disk.
01
02FE0105 A field in the VSI was not cleared while an attempt was made to clear the
interlock:
Last failure parameter [0] contains the nonvolatile (NV) index of the VSI
on which the problem was found.
Last failure parameter [1] contains the contents of the Enable_change
field of the VSI, that should be zero.
Last failure parameter [2] contains the contents of the Desired_state field
of the VSI, that should be zero.
Last failure parameter [3] contains the contents of the
Completion_routine field of the VSI, that should be zero.
Last failure parameter [4] contains the contents of the Open_requests
field of the VSI, that should be zero.
01
03010100 Failed request for port-specific scripts memory allocation. 01
Table 56: Last Failure Codes and Repair Action Codes (Sheet 20 of 55)
Last
Failure
Code
Description
Repair
Action
Code