Compaq StorageWorks HSG60 ACS Solution V8.6 for SGI IRIX Installation and Configuration Guide

Preparing the Host System 3–9
NOTE: To partition the device, follow the prompts and enter the answers displayed in the large
bold face italic type. The default answers are shown in ( ) braces. Press the Enter key to utilize
the default answer
The controller number, drive number and LUN number of your drive will probably be different for
arbitrated loop or fabric.
NOTE: The following entries are for Arbitrated Loop only.
# fx -x
fx version 6.5, Jan 20, 2000
fx: “device-name” = (dksc)
dksc
fx: ctlr# = (0) 10
fx: drive# = (1) 64
fx: lun# = (0) 4
...opening dksc(10,64,4)
...drive selftest...OK
NOTE: The following entries are for Fabric only.
# fx – x – d /dev/rdsk/50001fe1000007e0/lun0vol/c5p50001fe1000007e1
fx version 6.5, Jan 20,, 2000
...opening c5p50001fe1000007e1
...drive selftest...OK
NOTE: The following entries are for both Arbitrated Loop and Fabric.
Scsi drive type == DEC HSG60 V86
----- please choose one (? for help, .. to quit this menu)-----
[exi]t [d]ebug/ [l]abel/
[b]adblock/ [exe]rcise/ [r]epartition/
fx>
repartition
----- partitions-----
part type blocks Megabytes (base+size)
7: xfs 4096 + 20538224 2 + 10028
8: volhdr 0 + 4096 0 + 2
10: volume 0 + 20542320 0 + 10030
capacity is 20542320 blocks
----- please choose one (? for help, .. to quit this menu)-----
[ro]otdrive [u]srrootdrive [o]ptiondrive [re]size
fx/repartition>
optiondrive
fx/repartition/optiondrive: type of data partition = (xfs) xfs
Warning: you will need to re-install all software and restore user data
from backups after changing the partition layout. Changing partitions will cause all