Compaq StorageWorks HSG60 ACS Solution Software V8.6 for Sun Solaris Installation and Configuration Guide

Configuration Example Using CLI 7–7
RENAME !NEWCON01 WHITE1B2
SET WHITE1B2 OPERATING_SYSTEM=SUN
SHOW CONNECTIONS
Mark or tag both end of Fibre Channel cables.
Plug in the Fibre Channel cable from the adapter in host “TAN.”
SHOW CONNECTIONS
RENAME !NEWCON02 TAN1B2
SET TAN1B2 OPERATING_SYSTEM=SUN
SET TAN1B2 UNIT_OFFSET=120
SHOW CONNECTIONS
Connection
Name
Operating
System Controller Port Address Status
Unit
Offset
PURPLE1A1 SUN OTHER 1 XXXXXX OL other 0
HOST_ID=XXXX-XXXX-XXXX-XXXX ADAPTER_ID=XXXX-XXXX-XXXX-XXXX
WHITE1B2 SUN THIS 2 XXXXXX OL this 100
HOST_ID=XXXX-XXXX-XXXX-XXXX ADAPTER_ID=XXXX-XXXX-XXXX-XXXX
Connection
Name
Operating
System Controller Port Address Status
Unit
Offset
!NEWCON02 SUN THIS 2 XXXXXX OL this 100
HOST_ID=XXXX-XXXX-XXXX-XXXX ADAPTER_ID=XXXX-XXXX-XXXX-XXXX
PURPLE1A1 SUN OTHER 1 XXXXXX OL other 0
HOST_ID=XXXX-XXXX-XXXX-XXXX ADAPTER_ID=XXXX-XXXX-XXXX-XXXX
WHITE1B2 SUN THIS 2 XXXXXX OL this 100
HOST_ID=XXXX-XXXX-XXXX-XXXX ADAPTER_ID=XXXX-XXXX-XXXX-XXXX
Connection
Name
Operating
System Controller Port Address Status
Unit
Offset
PURPLE1A1 SUN OTHER 1 XXXXXX OL other 0
HOST_ID=XXXX-XXXX-XXXX-XXXX ADAPTER_ID=XXXX-XXXX-XXXX-XXXX
WHITE1B2 SUN THIS 2 XXXXXX OL this 100