MIB Reference Manual (Version 3.0)

2-44 MIB Reference Manual Version 3.0
Fibre Alliance MIB Object Types
2
connUnitPortHWState [connUnitPortTable]
Syntax
Access Read-only
Status Mandatory
Description The state of the port as detected by the hardware.
Connectivity Unit Event Table
connUnitEventTable
Syntax Sequence of ConnUnitEventEntry
Access Not accessible
Status Mandatory
Description The table of connectivity unit events. Errors, warnings, and information should be reported in this
table.
Table 2-21
Value Declaration Description
Integer 1 (unknown)
2 (failed)
3 (bypassed)
4 (active)
5 (loopback)
6 (txfault)
7 (noMedia)
8 (linkDown)
Port failed diagnostics (port_flt state)
FCAL bypass, loop only (not used)
Connected to a device (light and sync are present)
Port in ext loopback (loopback state)
Transmitter fault (bad GBIC)
Media not installed (GBIC removed)
Waiting for activity - rx sync (light with no sync)