Fabric OS Reference Manual (Version 3.0)

Fabric OS Reference 1-111
Telnet Commands
1
islTopoCheck
Display ISL sgroup connections for a switch.
Synopsis islTopoCheck
Availability admin
Description This command displays the ISL sgroup connections and status for this switch. This command is
used to verify that the switch is properly cabled and configured. A switch with properly configured
ISL connections reports a status of OK for each of these ports.
Note: This command is used for the FC 6164 only.
Operands None.
Example The following example displays islTopoCheck on a misconfigured FC 6164 switch. In a proper
configuration, all of the switches would have valid domains and valid names and each of the ports
status would be OK.
See Also islTopoShow
switch:admin> islTopoCheck
ISL data for type: S32_6_1, sgroup: My_group
idx domain expected wwn name
01 01 10:00:00:60:69:20:02:9f jr_1003
02 02 10:00:00:60:69:10:a0:4e switch
03 -01 00:00:00:00:00:00:00:03 -UNKNOWN-
04 -01 00:00:00:00:00:00:00:04 -UNKNOWN-
05 -01 00:00:00:00:00:00:00:05 -UNKNOWN-
06 -01 00:00:00:00:00:00:00:06 -UNKNOWN-
Domain: 2, wwn: 10:00:00:60:69:10:a0:4e
isl port expected switch port actual switch port status
0 08 -> jr_1003 : 00 jr_1003 : 00 OK
1 09 -> jr_1003 : 01 jr_1003 : 01 OK
2 10 -> jr_1003 : 02 jr_1003 : 03 Wrong port
3 11 -> jr_1003 : 03 -UNKNOWN- :-01 Bad status
4 12 -> -UNKNOWN- : 12 -UNKNOWN- :-01 Bad status
5 13 -> -UNKNOWN- : 13 jr_1003 : 07 Wrong switch
6 14 -> -UNKNOWN- : 14 -UNKNOWN- :-01 Bad status
7 15 -> -UNKNOWN- : 15 -UNKNOWN- :-01 Bad status