HP StorageWorks HSG80 ACS Solution Software V8.8 for HP-UX Installation and Configuration Guide (AA-RV1FA-TE, March 2005)

FC Configuration Procedures

152 HSG80 ACS Solution Software V8.8 for HP-UX Installation and Configuration Guide

Establishing a Local Connection

A local connection is required to configure the controller until a command console

LUN (CCL) is established using the CLI. Communication with the controller can

be through the CLI or SWCC.

The maintenance port, shown in Figure 40, provides a way to connect a

maintenance port. The maintenance port can be an EIA-423 compatible terminal

or a computer running a terminal emulator program. The maintenance port

accepts a standard RS-232 jack. The maintenance port cable shown in Figure 40

has a 9-pin connector molded onto the end for a PC connection. If you need a

terminal connection or a 25-pin connection, you can order optional cabling.

Figure 40: Maintenance port connection

Caution: The maintenance port generates, uses, and can radiate

radio-frequency energy through its cables. This energy may interfere with

radio and television reception. Disconnect all maintenance port cables when

not communicating with the controller through the local connection.

1 Maintenance Port

Cable

2 Maintenance Port

1 2 3 4 5 6