HP StorageWorks HSG80 ACS Solution Software V8.8 for HP-UX Installation and Configuration Guide (AA-RV1FA-TE, March 2005)

Installing and Configuring HSG Agent
142 HSG80 ACS Solution Software V8.8 for HP-UX Installation and Configuration Guide
The computer displays the following:
Figure 39: RAID array configuration menu
14. Select 12 and press Enter.
The computer displays the entered storage subsystems, as shown by the
following:
Storage subsystem List
hpk400a
Subsystem Controller Firm- EMU Access Monitoring
Name Type ware Type Device 1 Device
2 Period, secs
------------- ---------- ------ -------- --------
---------
HSG.0 HSG V86F None c6t2d0 180
HSG.1 HSG V86F None c5t1d0 180
15. Press Enter to continue. The RAID array configuration menu, shown in
Figure 39 above, is displayed.
16. To exit, select Q and press Enter.
RAID Array Configuration Menu
Agent Admin Options Storage Subsystem
Options
1) Change Agent Password 12) View Subsystems
2) Change SNMP Enterprise OID 13) Add a Subsystem
3) Start/Stop the Agent 14) Remove a
Subsystem
4) Toggle Agent Startup on Boot 15) Modify a Subsystem
5) Uninstall Agent
Agent Notification Options
Client Options
6) Toggle Error Log Notification 16) View Clients
7) Toggle Mail Notification 17) Add a Client
8) View Mail Notification List 18) Remove a Client
9) Add User to Mail Notification List 19) Modify a Client
10) Remove User from Mail Notification List
11) Modify Mail Notification List
Exit
:
Q)
Enter Selection: