HP StorageWorks HSG80 ACS Solution Software V8.8 for OpenVMS Installation and Configuration Guide (AA-RV1PA-TE, March 2005)

Installing and Configuring the HSG Agent
122 HSG80 ACS Solution Software V8.8 for OpenVMS Installation and Configuration Guide
You can change your configuration using the SWCC Agent Configuration menu.
To access this menu, enter the following command:
$ @sys$manager:swcc_config
The following is an example of the Agent Configuration menu:
Deleting a client system entry When you remove a client system from the Agent’s
list, you are instructing the Agent to stop sending
updates to that client system. In addition, you will be
unable to access this agent system from the
Navigation Tree.
Email notification Modify file pagemail.com in directory
sys$sysdevice:[swcc$agent].
When an error is logged, the Agent executes the
PAGEMAIL.COM command. You can modify this file
for Agent to log errors in a log file and/or change
the account to which Agent sends messages. You
can also modify for which level of errors you will be
notified. Client does not need to be running to
perform these actions.
Monitoring interval in
seconds
How often the subsystem is monitored.
Password It must be a text string that has 4 to 16 characters. It
can be entered from the client system to gain
configuration access. Accessing the SWCC Agent
Configuration menu can change it.
SWCC Agent for HS* Controllers Configuration Menu
Agent is enabled as TCP/IP Services for OpenVMS service.
Agent is now: active
Agent Admin Options:
1)Change Agent password
2)Agent Enable/Start
3)Agent Disable/Stop
4)Uninstall Agent
Client Options:
Table 14: Information Needed to Configure Agent (Continued)
Term/Procedure Description