HP StorageWorks 700ux/1100ux Optical Jukebox Service Manual (AA962-96004, September 2004)

Service Preparation
36 700ux/1100ux Optical Jukebox Service Manual
j. When AUTO PUSH ADJUST : SLOT displays, press NEXT until DRIVE displays,
then press ENTER.
k. Wait until 37: AUTO PUSH SET displays. This calibration will take about 1
minute.
l. Press CANCEL until ON LINE MODE? displays.
m. Press ENTER.
12. Verify that the new drive is recognized. Use L&TT, or from the front panel:
a. Press NEXT to display ADMIN*, then press ENTER.
b. Enter the password using PREV and NEXT, then press ENTER.
c. Press NEXT to display INFO*, then press ENTER.
d. Press NEXT to display JUKEBOX*, then press ENTER.
e. Press NEXT to display DRIVES #, with the number indicating how many drives are
recognized (1 or 2).
13. Update the drive firmware using L&TT.