HP StorageWorks 700ux/1100ux Optical Jukebox Service Manual (AA962-96004, September 2004)

Service Preparation
37700ux/1100ux Optical Jukebox Service Manual
Installing or replacing the slot configuration module
Installing a slot configuration module configures the jukebox for 38 slots, instead of the
standard 24 slots.
1. Power off the unit.
2. Locate the configuration module access door, below the power supply on the back of the
jukebox.
3. Remove the two T-10 Torx screws from the configuration module access door (see
Figure 11).
Figure 11: Access the configuration module
4. If you are replacing an existing slot configuration module, remove it from the jukebox.
5. Align the configuration module with the guides in the jukebox frame and push the new slot
configuration module into the drive until it is securely in place (see Figure 12).
Figure 12: Insert the slot configuration module
1 Back of jukebox
2 Configuration module access door
3 Screws securing configuration module access door
1 Configuration module 2 Slot for configuration module
1
2
3
1
2